69 Large Capacity Series
Powerful, reliable and customizable
Complies with all the strictest international directives and standards, including UL, ETL, CE, ASME.
24” x 36” x 36”
18 Cubic Feet (510 Liter)
24” x 36” x 48”
24 Cubic Feet (680 Liter)
24” x 36” x 60”
30 Cubic Feet (840 Liter)
24” x 36” x 72”
36 Cubic Feet (1015 Liter)
26” x 37.5” x 36”
20 Cubic Feet (575 Liter)
26” x 37.5” x 48”
27 Cubic Feet (760 Liter)
26” x 37.5” x 60”
34 Cubic Feet (950 Liter)
An optimized program for every load
| Program | Description | |
|---|---|---|
| F0 Cycle | F0 calculations begin when the slowest-to-heat load temperature sensor within the autoclave has reached a pre-determined set temperature. The cycle continues to calculate the F0 function until the pre-determined set point is satisfied. | |
| Disinfection/Isothermal Cycle | A flexible low temperature cycle enables disinfection. Temperature range settings are flexible within 70°C - 95°C range. | |
| Thermal Effluent Sterilization Cycle | Can be customized to meet the specific requirements of facilities classified as BSL3/4 where harmful pathogens and viruses that leave the sterilizer prior to disposal must be fully sterilized. The thermal effluent sterilization cycle will sterilize chamber air and wastewater prior to their release into the drain. |
-
7" multi-color touch screen panels store the last 100 cycles in built-in memory.
-
Multiple access levels and user passwords for added security.
-
Diagnostic In/Out test enables checking each system component separately.
-
USB Ports, Ethernet and Internal battery backup
-
Optional features include barcode readers, isothermal cycle for low temperature disinfection, software control and remote monitoring via R.PC.R. software.
-
Allen-Bradley® control systems, featuring a color touch screen interface are available upon request.
Loading equipment for the 69 Large Capacity Series is manufactured from high quality stainless steel material.
Rack & Shelves
Stainless steel electropolished trays equipped with rails for easy loading and unloading. The trays are sliding, extendable and removable.
Loading Cart & Transfer Carriage
The adjustable loading cart rolls from the transfer carriage onto the interior chamber tracks for easy handling of heavy loads. The transfer carriage is equipped with two swivel wheels, maximizing mobility in limited space. The transfer carriage is also equipped with wheel locks to stabilize the load, if needed.
Drop Wheel Loading Cart
This system can be utilized when space is limited and provides a convenient loading and unloading experience. To be used exclusively for “69 Large Capacity Series” and floor mounted bulk autoclave models.
Other accessories and options
Mounting
Can be recessed in one or two walls or as a free-standing unit with a stainless steel cabinet enclosure.
Air Removal
All Tuttnauer models come standard with the ability to run either gravity or pre-vacuum cycles. A water ejector or liquid ring vacuum pump, combined with steam pressure pulsing, evacuates air from the chamber. This improves your sterility assurance level and provides more effective drying.
Clean Steam Package
Includes stainless steel piping, fittings, and components.
Room Isolation Seals
To provide separation of dissimilar environments, the sterilizer can be fitted with the proper room isolation seal appropriately designed for the individual application.
Bio-Seal
Manufactured using a gasket material designed to prevent airborne contaminants from entering the clean areas of the facility.
Air Differential Seal
Manufactured using a gasket material designed to prevent the flow of air from one area to another.
Air Compressor
Where pressurized air is not available, Tuttnauer offers a small and quiet compressor that can be used to operate the pneumatic valves and/or power doors.
Reverse Osmosis Water Treatment System
Used when the local water supply exceeds the recommended “hardness” for steam generation. Designed to supply required feedwater to the steam generator. This system is wall mounted and includes an appropriately sized storage tank.
Descal-A-Matic
Used when the local water supply exceeds the recommended “hardness” for steam generation. No power source is required. The units are self-powered by a permanent magnetic core.
